Mouse DPI settings

[AriFeannor]

Windows: Default (Mouse Accel turned off)
DPI: 400
MOHAA: 4
Mouse: Zowie ZA13 (500 polling rate)
1 360 turn: 14 inches so 28 inches for 2.


I used a huge mousepad and fast arm movements.

Tro.. 53 inches for 2 360? I'm 28 inches with way less dpi and sensitivity. Recheck your measurements.

Yo bled, I can't remember is the Zowies have software but you don't have any mouse issues with 500 polling rate? Every other mouse that dosen't do 125 or 150 polling rate will have a jitter to the mouse. 400 DPI Can help it out with even higher polling rates but it still their. Try to move your mouse slowly, then change to the lowest polling rate and move it slowly again. See if you can see a difference. Would be interesting to know whether Zowie's have that problem or not.

[bl3dbl4k]

I just tried it out. It's similar at both rates, 125 and 500. No jitter. I heard about the newer mice having polling rate issues with Mohaa. But the 2 Zowie's I use, never had that problem. I don't use any software though.

[AriFeannor]

Thats cool, always wanted to try one out but I kind want the software with side buttons I can change the functions to. I hate mouse 4 and mouse 5.

[Tro]

Windows: Default (Mouse Accel turned off)
DPI: 400
MOHAA: 4
Mouse: Zowie ZA13 (500 polling rate)

1 360 turn: 14 inches so 28 inches for 2.


I use a huge mousepad and fast arm movements. I can do 1 full 360 on the pad.

Tro.. 53 inches for 2 360? I'm 28 inches with way less dpi and sensitivity. Recheck your measurements.

Just remeasured - keeping the mouse straight and all

So you can do a turn at the width of approx 2 fingers? - maybe your windows speed is right up?

Tro

[Tro]

Windows Sensitivity 6/11 Anything other than 6/11 will turn acceleration on!!! Never use acceleration of any form including smooth mouse or enhance pointer precision. So make sure you change your windows cursor speed to 6/11
.

I'll try it tomorrow, but I thought I had a way to turn off acceleration

Tro

[AriFeannor]

Windows Sensitivity 6/11 Anything other than 6/11 will turn acceleration on!!! Never use acceleration of any form including smooth mouse or enhance pointer precision. So make sure you change your windows cursor speed to 6/11
.

I'll try it tomorrow, but I thought I had a way to turn off acceleration

Tro

There are multiple forms of acceleration, Enhance pointer precision in windows additional mouse settings, not having 6/11 will add some, mouse software settings and the sensor itself if it is a bad sensor will add some.

[Tro]

WCS: 10 (I think)
DPI: 2400
MOHAA Sens: 3.00
M-Rotate: 27.5cm to do two 360's in game
Mouse: Razer Deathadder Essential

I fooked up cm/mm lol

so I am 13.6cm for 2 turns

makes more sense now lol

Call me noob .. maybe

Tro

[Tro]

Windows: Default (Mouse Accel turned off)
DPI: 400
MOHAA: 4
Mouse: Zowie ZA13 (500 polling rate)

1 360 turn: 14 inches so 28 inches for 2.


I use a huge mousepad and fast arm movements. I can do 1 full 360 on the pad.

Tro.. 53 inches for 2 360? I'm 28 inches with way less dpi and sensitivity. Recheck your measurements.

Yep I got it wrong

Now every time playing you, I know to run circles and give you a workout

My god, that's a LOT of movement for 1 turn! 350mm - just WOW lolz

Thats gotta be a shit load harder than playing with 250 ping!!!! - wholey cow batman lol

Tro

[AriFeannor]

Windows: Default (Mouse Accel turned off)
DPI: 400
MOHAA: 4
Mouse: Zowie ZA13 (500 polling rate)

1 360 turn: 14 inches so 28 inches for 2.


I use a huge mousepad and fast arm movements. I can do 1 full 360 on the pad.

Tro.. 53 inches for 2 360? I'm 28 inches with way less dpi and sensitivity. Recheck your measurements.

Yep I got it wrong

Now every time playing you, I know to run circles and give you a workout

My god, that's a LOT of movement for 1 turn! 350mm - just WOW lolz

Thats gotta be a shit load harder than playing with 250 ping!!!! - wholey cow batman lol

Tro

But his flick shots and general aim is more accurate because of the lower sensitivity.

[dckx]

Windows: 10 , which I think is the default value. Mouse Accel turned off. Furthermore, I installed a software that comes with my mouse and it has an option to override windows acceleration (i.e. enhanced precision off) and speed multiplier.
DPI: 1000
Polling rate: 1000
MOHAA sensitivity: 1.1
Mouse: Steelseries Rival 100

One 360º turn: 62cm or 24.4". That is roughly 2 times my mousepad length. Now that I think about it, I never do 360ºs, and probably never have. I only do 180ºs, which requires moving the mouse across the whole mousepad (around 30cm or 12" in my case). Additionally, I noted that If I wanna shoot someone behind me, almost every time I will rotate clockwise, and then return to looking to the front rotating counterclockwise (hence no need for 360s).

Note: Last time I played actively probably was early 2019 if not earlier. At the time, I didn't have the steelseries software that overrides windows mouse settings. Back then, I think my mohaa sensitivity was 3.2 or so. I installed the mouse software in early March so I have only experienced my mouse's new behavior while playing Warzone. I think it was in a recent pug that I played that I set my new sensitivity to 1.1. It felt somewhat close to what I remember mohaa felt back then, so I guess the effective mouse speed in mohaa is similar to what it was before.